F’s done.
Alphabet Quilt – F
Filed under Applique, Machine Embroidery, Quilting
Alphabet Quilt – E
Fabric for the applique is from here …
Filed under Applique, Machine Embroidery, Quilting
Alphabet Quilt – D
Filed under Applique, Machine Embroidery, Quilting
Alphabet Quilt – C
The machine embroidery design is from here…
Filed under Applique, Machine Embroidery, Quilting
Alphabet Quilt
I’ve started a new project – an alphabet sampler quilt. The alphabet sunbonnet designs are from here. The fabric for the applique is from here.
Each of the alphabet blocks will be 15cm by 15cm – once they’re all made I’ll think about borders etc.
In case you’re interested, I used Robinson Anton Rayon embroidery thread, the base fabric is white homespun and I’ve stabilised with calico (I bought a roll from Spotlight)
I will finish the mod 9 quilt I just need a bit of time when Misses A and P aren’t around, so I can lay it out and pin it.
Filed under Applique, Machine Embroidery, Quilting
Mod 9 Backing
I’ve sewn the backing together for this quilt.
There was quite a bit of cutting involved. Each of the large purple stripes consists of two parts and the thinner spotty stripes weren’t quite wide enough, so I needed to added extra purple bits on the end.
All the fabric came from my stash!
I then went to this shop and bought 100% cotton batting.
Now for the quilting …
Tutorial – Machine Embroidery Multi Hooping Part 2 and 3
The tutorial (on how to create large machine embroideries) is finished you can find it here.
Filed under Machine Embroidery, Sewing Machine, Software
Machine Embroidery Multi Hooping Tutorial
As promised, here is the start of the tutorial.
Filed under Machine Embroidery, Software
Machine Embroidery – Multi Hooping – I Did It!
I have an embroidery sewing machine. It’s largest hoop is 200mm by 140mm (not including the gigahoop). I’ve always wanted to embroider a larger area and finally I did. I used Embird (to create the design and print the template) and a clothsetter (to place the fabric accurately in the hoop).
I made a birth sampler for Miss A (I removed her name and birth date from the above image for obvious reasons). It measures 35cm by 35cm and took 7 hoopings.
I will write a tutorial about my method (because I searched and couldn’t find anything particularly helpful).
Filed under Machine Embroidery, Sewing Machine, Software








